Leneta Company, Inc. 15 Whitney Rd, Mahwah, NJ, 07430 USA

Form P123-10N Leneta White Scrub Test Panel

White Plastic-Vinyl Chloride/Acetate Copolymer
Smooth Matte Surface – Plasticizer Free

Description

White Plastic-Vinyl Chloride/Acetate Copolymer
Smooth Matte Surface – Plasticizer Free
Used in ASTM D 2486, ASTM D 4213, ISO 11998 and Other Scrub Test Methods

In a typical scrub test, the coating is applied to the Leneta Scrub Test Panel at a specified film thickness, allowed to dry, then subjected to scrubbing with a straight-line scrub tester. In ASTM D 2486, a 10 mil shim is inserted under the panel to accelerate failure and thereby reduce testing time. The scrub resistance is the number of scrub cycles required to remove the coating to a specified end point.

Alternatively, the loss in weight is determined after a specified number of scrub cycles as a measure of scrub resistance, with calculation of equivalent loss in film thickness.

Leneta Scrub Test Panels have a special, finely textured surface for enhanced adhesion. As paints are gradually worn down during the scrubbing process, a feathered edge” is produced which allows for a more precise determination of the end point

Additional information

Color

White

Thickness

10 mil,
0.25 mm

Size

6-1/2 x 17 in,
165 x 432 mm

Quantity per Box

100

Boxes per Case

5

International Standards

ASTM D 2486
ASTM D 3450
ASTM D 4213
ASTM D 4828
ASTM D 6900
ASTM D 7377
ISO 11998