Leneta Company, Inc. 15 Whitney Rd, Mahwah, NJ, 07430 USA

Item ASM-1, Leneta Anti-Sag Meter

Used in ASTM D4400, Test Method for Sag Resistance of Paints
This is a drawdown blade with a series of notches of successively higher clearance.

Description

Used in ASTM D4400, Test Method for Sag Resistance of Paints
This is a drawdown blade with a series of notches of successively higher clearance. The notch clearance is related to the degree of sagging and provides a numerical value referred to as the Anti-Sag Index. The higher the Anti-Sag Index the better the sag resistance of the coating. The Anti-Sag Meter is called for in ASTM Method D 4400 and Federal U.S. Fed, No. 141 Method 4494 test methods and is essential equipment in paint laboratories in the U.S.A. and throughout the world.

Additional information

Range

Standard

For Coating Type

Solventborne Architectural

Notch Clearances1

3 mil (78 µm)
4 mil (225 µm)
5 mil (250 µm)
6 mil (100 µm)
7 mil (275 µm)
8 mil (125 µm)
9 mil (150 µm)
10 mil (300 µm)
11 mil (175 µm)
12 mil (200 µm)

International Standards

ASTM D 4400

Additional Details

1 Mils are exact, microns are approximate. Wet film thickness is about half of the clearance.